Mon - Fri: 9:00 - 19:00
UV-stabilized PE bubble sheeting that limits evaporation, holds pool heat, and keeps debris out between swims.
Product Overview
A solar pool cover is a floating bubble sheet that rests directly on the water with the cells facing down. Air sealed inside each bubble creates a still insulating layer, while the translucent film allows sunlight to pass into the pool. Blue is the color most widely stocked, and the rolled format shown here is how distributors, pool builders and retailers normally receive the material. Buyers fit it to slow evaporation, reduce overnight heat loss and keep leaves and dust away from the water. Because the solar pool cover is a consumable that is replaced on a seasonal cycle in most markets, it generates predictable repeat orders for pool supply wholesalers. Unlike rigid enclosures, it needs no frame, motor or anchoring system to work. For a buyer comparing water heating options, the solar pool cover is usually the lowest-cost entry point.
Material and Construction
This solar pool cover is made from coextruded low-density polyethylene film with a uniformly embossed bubble layer. the sheet resists embrittlement during long exposure to sun, and antioxidant additives are commonly included for the same reason. Bubble diameter in the trade typically falls between 10 mm and 16 mm, with a cell height of roughly 3 mm to 5 mm, although the exact geometry follows each factory's tooling. Gauge is quoted in microns or mils; 200, 300 and 400 micron grades, roughly 8, 12 and 16 mil, are the options most often requested. A tinted blue top web paired with a clearer bubble web is a standard build, because the tint controls glare while still transmitting solar energy. Widths are joined by heat welding rather than sewing, which keeps the floating panel watertight and avoids needle perforations. Hemmed borders, reinforced edge tape and eyelets are added when the solar pool cover will be handled on a reel. The finished solar pool cover stays flexible enough to roll without cracking in cool weather.
Sizes and Selection
Bulk rolls are commonly supplied 2.5 m to 5 m wide and in 10 m, 20 m, 25 m or 50 m lengths, then trimmed to the pool outline on site. Rectangular and free-form basins are cut to shape with shears or a utility knife, while above-ground circular pools are often served by pre-cut discs. Gauge selection is a commercial decision as much as a technical one: lighter material ships economically and suits short seasons, whereas heavier grades are stocked for commercial pools, high-UV regions and longer service intervals. When ordering a solar pool cover, record the finished water dimensions, the shape, the intended season length and whether a reel will be used. Installers normally leave a small trimming margin rather than specifying an exact net size, since a solar pool cover cut slightly oversize can be adjusted after the first fitting. Confirm roll width availability with the manufacturer before planning a cutting layout, because waste from an awkward width can outweigh a small difference in unit price.
Color, gauge, roll width, bubble geometry can be specified for private-label programs. Blue, Green,dark tones all appear in the trade,custom cartons, instruction inserts and barcoded labels are routine requests. Reinforced hems, welded seams that build extra width, and pre-cut shapes for above-ground pool kits are further options. If you intend to sell the solar pool cover under your own brand, provide the artwork, the required label text and any market-specific regulatory wording at the start of development, because changing print after extrusion adds cost. Tooling or plate charges, where they apply, are quoted separately by the manufacturer.
A solar pool cover floats on the water surface to help reduce water evaporation, retain pool warmth, and limit leaves and light debris from entering the pool. Actual results depend on weather, pool conditions, cover fit, and usage.
Material, thickness, bubble specification, and color can be selected according to your market and application requirements. Please contact us for the available specifications and color options.
Service life depends on sunlight intensity, temperature, pool chemicals, storage, handling, and frequency of use. Proper cleaning, storage, and maintenance can help extend the service life. The expected service-life range should be confirmed according to the selected specification.
Yes, when the pool is properly maintained. Avoid placing the cover on the pool immediately after adding concentrated chemicals. Allow sufficient water circulation and follow the recommended chemical and maintenance instructions.
MOQ depends on the size, thickness, color, packaging, logo, and other customization requirements. Please send us your target specification and estimated quantity for an accurate quotation.
Yes. Samples can be arranged for checking the material, thickness, color, size, and packaging. Sample cost, courier charge, and delivery time depend on the selected specification and destination.
Yes. We can discuss customized sizes, colors, labels, packaging, barcodes, and other private-label requirements according to the product structure and order quantity.
Lead time depends on the order quantity, product specification, customization, and current production schedule. To receive a quotation, please provide:
Send us your pool dimensions and target quantity for a customized quotation.
High Quality Heavy Duty 10'x20' Outdoor Carport Canopy Tent Metal Frame Sidewalls Portable Garage for Car Parking Shed Car use
Outdoor Use of Blue PE Material, Tear Resistance, Strong and Durable PE Tarpaulin Poly Tarp Roll
Construction HDPE Outdoor Orange Plastic Safety Warning Barrier Snow Fence
Blue Solar Pool Cover, UV Resistant Bubble Rolls